Loading the interactive model…
Interactive 3D model of Centrifugal Blower System with Cylindrical FurnaceEverything else
Centrifugal Blower System with Cylindrical Furnace
10 views
- Bounding box
- 2000.0 × 2302.1 × 725.0 mm
- Engine
- Precision B-rep
- Parameters
- 36
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
pipanya kok tidak tersambung dengan tungku? dan tungku berbentuk tabung bukan kotak
Parameters
| Name | Value | Range |
|---|---|---|
| Volute outer diameter | 200 mm | 100 – 400 |
| Volute width (X) | 60 mm | 30 – 120 |
| Outlet box length | 60 mm | 20 – 150 |
| Impeller outer diameter | 180 mm | 80 – 350 |
| Impeller width | 50 mm | 20 – 100 |
| Impeller hub diameter | 40 mm | 10 – 100 |
| Impeller blade count | 6 | 2 – 12 |
| Impeller blade thickness | 3 mm | 1 – 10 |
| Shaft diameter | 20 mm | 8 – 50 |
| Shaft length | 120 mm | 50 – 250 |
| Motor diameter | 100 mm | 50 – 200 |
| Motor length | 80 mm | 40 – 160 |
| Inlet duct outlet diameter | 180 mm | 80 – 300 |
| Inlet duct inlet diameter | 220 mm | 100 – 350 |
| Inlet duct length | 60 mm | 30 – 150 |
| Transition rectangle width (X) | 60 mm | 20 – 150 |
| Transition rectangle height (Z) | 60 mm | 20 – 150 |
| Transition pipe diameter | 110 mm | 50 – 200 |
| Transition length | 80 mm | 30 – 200 |
| Pipe inner diameter | 100 mm | 40 – 300 |
| Pipe wall thickness | 5 mm | 1 – 20 |
| Pipe length | 1000 mm | 200 – 2000 |
| Furnace outer diameter | 300 mm | 150 – 600 |
| Furnace height | 400 mm | 200 – 800 |
| Furnace wall thickness | 5 mm | 2 – 20 |
| Nozzle inner diameter | 100 mm | 40 – 300 |
| Nozzle wall thickness | 5 mm | 1 – 20 |
| Nozzle length | 50 mm | 20 – 150 |
| Stack inner diameter | 80 mm | 30 – 200 |
| Stack wall thickness | 3 mm | 1 – 20 |
| Stack height | 300 mm | 100 – 600 |
| Frame length (Y) | 2000 mm | 500 – 3000 |
| Frame width (X) | 500 mm | 100 – 1200 |
| Frame height (Z) | 20 mm | 10 – 100 |
| Blower Y center | 0 mm | -500 – 500 |
| Pipe center Z | 150 mm | 50 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS