Brackets and mounts
Central Ring Flanged Bracket
- Bounding box
- 89.2 × 94.1 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- August 14, 2026
Download
Free to download and use. See the terms.
The prompt
Main Body and Central Ring:Create a central circular ring with an inner diameter of 44.38 mm and an outer radius of 32.6 mm, centered at the origin (0,0).Right Vertical Flange:Attach a vertical rectangular plate on the right side.The rightmost outer straight edge is parallel to the Y-axis.The bottom edge is located 41.65 mm below the center origin, with a width of 42.85 mm extending from the inner vertical alignment.The total height of this right plate is 94.07 mm.The top section steps inward to a width of 29.39 mm.Add one mounting hole with a diameter of 10 mm in the top section of this flange, positioned 14.69 mm from the rightmost edge.Apply a 5 mm fillet (R5) to the top-right, bottom-right, and inner transition corners where the plate meets the central ring structure.Left Angled Flange:Extrude an angled mounting tab/flange extending to the left of the central ring.The outer straight edge of this tab has a total length of 41.37 mm.Place two identical circular holes inside this tab, each with a diameter of 10 mm.The center-to-center distance between these two holes is 16.9 mm, and each hole is symmetrically spaced 12.24 mm away from its respective outer side corner.
Parameters
| Name | Value | Range |
|---|---|---|
| Ring inner diameter | 44.38 mm | 30 – 60 |
| Ring outer radius | 32.6 mm | 25 – 45 |
| Part thickness | 10 mm | 4 – 20 |
| Right flange inner X | 0 mm | -10 – 10 |
| Right flange bottom width | 42.85 mm | 30 – 60 |
| Right flange top width | 29.39 mm | 20 – 50 |
| Right flange bottom Y | -41.65 mm | -60 – 0 |
| Right flange total height | 94.07 mm | 70 – 120 |
| Right flange step Y | 32.6 mm | 0 – 50 |
| Right hole diameter | 10 mm | 5 – 20 |
| Right hole from right edge | 14.69 mm | 5 – 30 |
| Right hole vertical center | 42.51 mm | 35 – 52 |
| Left angled tab outer edge length | 41.37 mm | 30 – 60 |
| Left angled tab width | 18 mm | 8 – 30 |
| Left angled tab inward angle | 30 deg | -60 – 60 |
| Left hole diameter | 10 mm | 5 – 20 |
| Left hole from outer corner | 12.24 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent