Everything else
Cell Membrane Model
- Bounding box
- 120.0 × 80.0 × 32.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- August 31, 2026
Download
Free to download and use. See the terms.
The prompt
Create a simple 3D model of a cell membrane. Overall size: 120 mm wide, 80 mm long, and 20 mm thick. Make a rectangular membrane with two layers of phospholipids. Each phospholipid: * 1 sphere, 6 mm diameter, for the head. * 2 straight cylinders, 3 mm diameter and 10 mm long, for the tails. Place the heads on the outside and the tails facing each other in the center. Add 8 small spheres, 3 mm diameter, between the tails to represent cholesterol. Add 3 large cylinders, 8 mm diameter and 24 mm long, crossing the membrane to represent membrane proteins. Use only spheres, cylinders, and rectangular blocks. Do not use cones, curves, torus shapes, text, or complex geometry. Make the model simple, clean, and suitable for 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 120 mm | 60 – 200 |
| Base Width | 80 mm | 40 – 150 |
| Base Thickness | 20 mm | 10 – 40 |
| Head Diameter | 6 mm | 3 – 10 |
| Tail Diameter | 3 mm | 2 – 6 |
| Tail Length | 10 mm | 5 – 20 |
| Cholesterol Diameter | 3 mm | 2 – 6 |
| Cholesterol Count | 8 | 4 – 16 |
| Protein Diameter | 8 mm | 4 – 15 |
| Protein Length | 24 mm | 20 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like