Brackets and mounts
CCV Intake Tube 240 mm (24 -> 26 mm ID)
- Bounding box
- 240 × 30 × 30 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
➤ Dimensions & Shape: Length: 230–250 mm → use 240 mm. Inner Diameter: Valve Cover End: 24 mm → draw circle with inner radius 12 mm. Intake Port End: 26 mm → draw circle with inner radius 13 mm. Outer Diameter: ~30 mm → so outer radius 15 mm. Connection Point: Plugs into side port of main intake pipe (at 90° angle). Must align with PTC heater (2-pin electrical connector) — add symbol or note: “PTC Heater Plug (2-pin) — MUST BE PLUGGED IN”. Tube Type: Corrugated flexible plastic — draw wavy lines or “zig-zag” pattern for flexibility. 🖍️ Sketch Tip: From the side port of the main intake pipe (at 90° angle), draw a 240 mm tube. Start with 24 mm inner diameter (draw inner circle 12 mm radius). End at 26 mm inner diameter (draw inner circle 13 mm radius) — add wavy lines or corrugations. Add annotation: “PTC Heater Plug — Must Be Plugged In (DDE Fault Risk)” near the port. 🧩 ASSEMBLY NOTES (FOR 2D DRAFT) ⚙️ Main Pipe Features: Integrated resonator (draw small oval or rectangle inside pipe body — optional if not critical for draft). Crankcase heater plug (draw small square/rectangle near end with “PTC Heater” label — not on CCV tube). Must match OEM part numbers: OEM Part: 13717810135 (E90) / 13717804846 (F30) CCV Hose: 13717803842 / 13717810772 🔧 Critical Assembly Tips: Heater must be plugged — no open circuit = DDE fault. Main pipe must be rigid — cannot suck flat under vacuum. CCV tube ≠ EGR — avoid confusion. Tapered fit — pipe must fit snugly into turbo inlet (63 mm ID). Clamp range — 66–86 mm around rubber boot — so pipe must be slightly larger than 60–65 mm at inlet. 🖼️ HOW TO USE THIS DRAFT ✅ Use this guide to sketch in AutoCAD, FreeCAD, or Inkscape ✅ Copy dimensions into CAD software — use “dimension” tools to label inner/outer diameters ✅ Use “arc” or “spline” tools for S-bend curves ✅ Annotate heater plug and CCV tube with text boxes
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 240 mm | 100 – 400 |
| Inner dia. - valve cover end | 24 mm | 10 – 60 |
| Inner dia. - intake port end | 26 mm | 10 – 60 |
| Outer dia. at corrugation crests | 30 mm | 20 – 60 |
| Corrugation depth | 0.6 mm | 0.2 – 2 |
| Corrugation pitch | 12 mm | 4 – 30 |
| Smooth (un-ribbed) length at each end | 8 mm | 0 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Hydraulic Wing and Flaperon Demonstrator
Create a parametric 3D CAD model of a hydraulic aircraft wing and movable flaperon based on the reference sketch. **Wing dimensions:** - 240 mm chord, 120 mm span, 48 mm thickness
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
