Brackets and mounts
Catamaran Concept Layout
- Bounding box
- 758.9 × 447.8 × 163.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Using the existing twin hull layout as a base reference, create a full catamaran concept layout. Do NOT significantly change the hull shapes or spacing. Add: 1. Central electronics pod: - approximately 235 mm wide, 230 mm long - positioned at midships - connects structurally between hulls - raised above the hull tops (do NOT create a full flat deck) 2. Bridge structure: - forward and rear crossbeam elements - keep tunnel visually open 3. Snack tray: - integrated into the top of the central pod - large, rectangular, slightly recessed 4. Drink holders: - 4 positions - integrated into inner hull shoulders near midships - low-profile, not tall cylinders 5. FPV camera: - short, sculpted forward pylon - not a thin pole 6. Water cannon: - front-mounted, centred, low-profile Design language: - premium consumer product (DJI / Bambu style) - smooth surfaces, large fillets - clean modular separation lines - no boxy slabs, no primitive shapes Keep everything cohesive and realistic.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 720 mm | 300 – 1500 |
| Hull Beam | 110 mm | 50 – 200 |
| Hull Height | 115 mm | 80 – 200 |
| Entry Length | 170 mm | 50 – 400 |
| Bow Rise | 20 mm | 0 – 50 |
| Hull Spacing | 310 mm | 200 – 600 |
| Pod Width | 235 mm | 150 – 400 |
| Pod Length | 230 mm | 150 – 400 |
| Pod Height | 40 mm | 10 – 80 |
| Recess Depth | 10 mm | 2 – 30 |
| Recess Margin | 15 mm | 5 – 50 |
| Crossbeam Width | 20 mm | 5 – 50 |
| Crossbeam Height | 30 mm | 5 – 60 |
| Fwd Crossbeam X | 150 mm | 50 – 400 |
| Rear Crossbeam X | 570 mm | 200 – 700 |
| Holder X1 | 240 mm | 100 – 600 |
| Holder X2 | 480 mm | 100 – 600 |
| Holder Y Offset | 130 mm | 100 – 200 |
| Holder Radius | 15 mm | 5 – 30 |
| Holder Depth | 20 mm | 5 – 40 |
| Holder Height | 25 mm | 10 – 50 |
| Pylon X | 50 mm | 10 – 300 |
| Base Length | 40 mm | 10 – 80 |
| Base Width | 30 mm | 10 – 60 |
| Top Length | 20 mm | 5 – 40 |
| Top Width | 15 mm | 5 – 30 |
| Pylon Height | 25 mm | 10 – 60 |
| Cannon Radius | 8 mm | 3 – 20 |
| Cannon Length | 25 mm | 10 – 50 |
| Cannon Z Fraction | 0.5 | 0.2 – 0.8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu