Everything else
Carseat Handle with Mesa V3 Attachment Interface
- Bounding box
- 38.0 × 148.0 × 94.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- October 6, 2026
Download
Free to download and use. See the terms.
The prompt
can you show me how it would connect to the carseat?
Parameters
| Name | Value | Range |
|---|---|---|
| Handle Span (arm centres) | 110 mm | 60 – 250 |
| Handle Height | 70 mm | 30 – 200 |
| Arm / Bar Diameter | 10 mm | 4 – 30 |
| Snap Hub Outside Diameter | 24 mm | 10 – 60 |
| Snap Hub Thickness | 8 mm | 3 – 30 |
| Clip Bore Diameter | 8 mm | 3 – 30 |
| Snap Entry Slot Width | 4 mm | 2 – 20 |
| Grip Sleeve Diameter | 18 mm | 6 – 40 |
| Grip Sleeve Length | 60 mm | 10 – 200 |
| Carseat Cross Pin Diameter | 8.4 mm | 3 – 30 |
| Exposed Pin Length (hub to ear) | 3 mm | 0.5 – 15 |
| Clevis Ear Thickness | 10 mm | 3 – 30 |
| Handle-to-Plate Clearance | 4 mm | 1 – 30 |
| Receiver Plate Thickness | 10 mm | 3 – 40 |
| Receiver Plate Height | 30 mm | 12 – 120 |
| Mounting Hole Diameter | 5 mm | 2 – 12 |
| Mounting Hole Pitch (across) | 60 mm | 20 – 200 |
| Mounting Hole Pitch (vertical) | 18 mm | 8 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm