Carcasa Wenax M2 cu balama print-in-place v2

1 views

Bounding box: 113 × 136 × 15.9 mm
Engine: 3D Printing B-rep
Parameters: 18
Published: November 13, 2026

Download

Free to download and use. See the terms.

The prompt

Carcasa Wenax M2: locas principal 130 mm, locasuri pod-uri 54 mm, magneti 8.2x3.2 mm, balama print-in-place, lip de aliniere

Parameters

Name	Value	Range
Lungime locas principal	130 mm	100 – 160
Latime locas principal	17 mm	14 – 24
Diametru locas pod-uri	16.5 mm	12 – 22
Lungime locas pod	54 mm	30 – 60
Raza adancitura pentru deget	7 mm	4 – 9
Perete lateral / capete	3 mm	2.5 – 5
Grosime fund	3 mm	2.5 – 5
Perete frontal cu magneti	12 mm	10 – 16
Perete spre balama	8 mm	8 – 12
Rotunjire muchii exterioare	2.5 mm	2 – 3
Diametru gaura magnet	8.2 mm	5.5 – 10
Adancime gaura magnet	3.2 mm	1.8 – 4.5
Pozitia magnetilor fata de capete	22 mm	12 – 40
Joc balama print-in-place	0.35 mm	0.3 – 0.4
Numar segmente balama (impar)	5 mm	3 – 9
Inaltime lip	1.5 mm	1 – 2.5
Latime lip	1.2 mm	1 – 1.6
Joc lip	0.25 mm	0.2 – 0.4

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS