Everything else
Carbon Fiber Quadcopter Frame
- Bounding box
- 307.3 × 307.3 × 11.5 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Design me a carbon fiber drone frame that fits the following parameters: 4 inch rotors, frame thickness: minimum required for structural rigididity of drone and 6s2p battery with 500g payload, motors facing down, frame acts as a guard for props,
Parameters
| Name | Value | Range |
|---|---|---|
| Hub Side Length | 60 mm | 40 – 100 |
| Hub Thickness | 3 mm | 1 – 5 |
| Hub Mount Hole Diameter | 3 mm | 1 – 5 |
| Hub Mount Hole Offset from Center | 25 mm | 10 – 40 |
| Arm Length | 90 mm | 50 – 150 |
| Arm Width | 20 mm | 10 – 30 |
| Arm Thickness | 3 mm | 1 – 5 |
| Motor Mount Hole Diameter | 3 mm | 1 – 5 |
| Motor Mount Hole Spacing | 10 mm | 5 – 15 |
| Motor Mount Hole Offset from Tip | 5 mm | 2 – 10 |
| Prop Guard Inner Diameter | 105 mm | 50 – 200 |
| Prop Guard Outer Diameter | 120 mm | 60 – 250 |
| Prop Guard Height | 10 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like