Loading the interactive model…
Interactive 3D model of Car Chest BadgeEverything else
Car Chest Badge
4 views
- Bounding box
- 100.0 × 100.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D model of a car‑themed chest badge with a flat back side, measuring 100 × 100 × 10 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Width | 100 mm | 50 – 200 |
| Plate Height | 100 mm | 50 – 200 |
| Base Thickness | 2 mm | 1 – 5 |
| Relief Height | 8 mm | 2 – 15 |
| Car Body Scale | 0.8 - | 0.5 – 0.95 |
| Body Height Ratio (to width) | 0.5 - | 0.3 – 0.8 |
| Cabin Length (fraction of body) | 0.4 - | 0.2 – 0.6 |
| Cabin Height (fraction of body) | 0.6 - | 0.4 – 0.8 |
| Wheel Radius (fraction of body height) | 0.2 - | 0.1 – 0.4 |
| Wheel End Offset (fraction of body length) | 0.15 - | 0.08 – 0.3 |
| Top Edge Fillet Radius | 1 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS