Brackets and mounts
Capsule Case with Rear Clips
- Bounding box
- 90.0 × 37.5 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- September 25, 2026
Download
Free to download and use. See the terms.
The prompt
Modele uma case 3D para impressão, formato cápsula alongada (cantos levemente arredondados), totalmente lisa e fechada, sem nenhum furo ou abertura em nenhuma face. Dimensões: 9cm de comprimento, 3cm de largura/profundidade, 4cm de altura. A case é composta por duas partes (metade superior e metade inferior) que se encaixam e abrem exatamente na linha central da altura (divisão nos 4cm). Na parte traseira, adicionar dois clipes de roupa planos com aba flexível, um de cada lado, para prender a case em uma peça de roupa. A parte frontal deve ficar completamente lisa, sem recortes. Espaço interno oco suficiente para acomodar uma placa WeMos ESP32 WiFi & Bluetooth Battery, um LED RGB, um sensor MPU6050 e um motor de vibração (vibracall).
Parameters
| Name | Value | Range |
|---|---|---|
| Case Length (X) | 90 mm | 60 – 140 |
| Case Width (Y) | 30 mm | 20 – 60 |
| Case Height (Z) | 40 mm | 20 – 80 |
| Wall Thickness | 2 mm | 1.2 – 4 |
| Split Line Height | 20 mm | 8 – 60 |
| Joint Rebate Height | 2 mm | 1 – 5 |
| Joint Rebate Depth | 0.5 mm | 0.2 – 1.5 |
| Edge Fillet Radius | 1 mm | 0 – 3 |
| Clip Length (Z) | 25 mm | 10 – 40 |
| Clip Width (X) | 10 mm | 4 – 25 |
| Flexible Arm Thickness | 2.5 mm | 1.2 – 6 |
| Hook Protrusion | 8 mm | 3 – 20 |
| Hook Block Height | 5 mm | 2 – 12 |
| Clip Center Height | 20 mm | 6 – 60 |
| Clip Offset From Center | 22 mm | 5 – 40 |
| Clip Embed Into Wall | 0.5 mm | 0.2 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu