Brackets and mounts
Cane Table Edge Resting Clip
- Bounding box
- 35.0 × 89.8 × 12.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- October 20, 2026
Download
Free to download and use. See the terms.
The prompt
A table edge resting clip for a walking cane, consisting of two main components connected by a hinge. Part 1: A flexible C-shaped cylindrical clamp designed to snap vertically onto a round cane shaft. Part 2: A flat, extended rectangular resting plate. The hinge connects the outer back of the C-clamp to the short edge of the rectangular plate. The critical feature is the hinge mechanism, which allows the rectangular plate to fold out exactly perpendicular (90 degrees) to the vertical C-clamp to rest flat on a table. The top face of the rectangular plate features a shallow rectangular recess for attaching a non-slip pad. Designed for functional 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Clamp Outer Diameter | 25 mm | 15 – 40 |
| Clamp Wall Thickness | 4 mm | 2 – 8 |
| Clamp Height | 12 mm | 6 – 30 |
| Clamp Slot Angle | 60 deg | 30 – 120 |
| Knuckle Outer Diameter | 8 mm | 5 – 15 |
| Knuckle Length | 10 mm | 5 – 20 |
| Hinge Pin Diameter | 4 mm | 2 – 8 |
| Hinge Pin Length | 32 mm | 20 – 50 |
| Plate Length | 60 mm | 30 – 100 |
| Plate Width | 35 mm | 20 – 60 |
| Plate Thickness | 5 mm | 2 – 10 |
| Recess Length | 50 mm | 20 – 90 |
| Recess Width | 25 mm | 10 – 50 |
| Recess Depth | 1.5 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu