Brackets and mounts
Canard Hinge Bracket
- Bounding box
- 16.0 × 24.0 × 13.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a canard hinge bracket for a 40 mm outer-diameter tube-launched UAV fuselage. The base is a concave saddle with a 20 mm radius to sit flush against the fuselage tube, 24 mm long and 16 mm wide, 2 mm wall thickness. Rising from the base are two parallel knuckle lugs, 3 mm thick each, spaced 6 mm apart, each with a 2 mm diameter pin bore centered 8 mm above the saddle surface. Add two 2.5 mm mounting holes through the saddle base, one at each end along the centerline. Fillet all structural junctions at 1 mm. Minimum wall 1.2 mm for carbon-fiber nylon FDM printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Saddle radius (tube OD/2) | 20 mm | 10 – 50 |
| Saddle length (axial) | 24 mm | 10 – 100 |
| Saddle width (circumferential) | 16 mm | 10 – 50 |
| Wall thickness | 2 mm | 1 – 5 |
| Lug thickness | 3 mm | 1 – 5 |
| Gap between lugs (inner faces) | 6 mm | 1 – 20 |
| Pin hole diameter | 2 mm | 1 – 5 |
| Pin hole center height above saddle surface | 8 mm | 3 – 20 |
| Extra material above pin hole | 3 mm | 1 – 10 |
| Mounting hole diameter | 2.5 mm | 1 – 5 |
| Mount hole offset from base end | 4 mm | 2 – 10 |
| Fillet radius | 1 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent