Brackets and mounts
Camera Mast
- Bounding box
- 40.0 × 40.0 × 105.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- October 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create a camera mast for a small robot rover, for 3D printing in PLA. Units: millimeters. - Base flange: 40 mm x 40 mm x 5 mm, with four M3 through-holes (3.2 mm) in a 30 mm x 30 mm square. - Vertical post on the flange center: 15 mm x 15 mm cross section, 100 mm tall. - Fillet the joint between the post and the flange with a 4 mm radius for strength. - At the top of the post: a fork with two parallel prongs 4 mm thick and 20 mm tall, with a 26 mm gap between them, and one M3 through-hole (3.2 mm) across both prongs, 12 mm below the top, as a tilt hinge axis. - On the back face of the post: a vertical channel 17 mm wide and 2 mm deep along the full height, for a flat camera ribbon cable, with three small clip bridges (17 mm wide, 2 mm thick, 5 mm long) spaced evenly.
Parameters
| Name | Value | Range |
|---|---|---|
| Flange Size | 40 mm | 20 – 80 |
| Flange Thickness | 5 mm | 2 – 15 |
| Bolt Hole Diameter | 3.2 mm | 1 – 8 |
| Bolt Pattern Spacing | 30 mm | 10 – 70 |
| Post Cross Section | 15 mm | 6 – 40 |
| Post Height | 100 mm | 30 – 250 |
| Base Fillet Radius | 4 mm | 0.5 – 6 |
| Prong Thickness | 4 mm | 1 – 10 |
| Prong Height | 20 mm | 6 – 50 |
| Gap Between Prongs | 26 mm | 5 – 60 |
| Fork Base Block Height | 8 mm | 2 – 30 |
| Hinge Hole Diameter | 3.2 mm | 1 – 8 |
| Hinge Hole Below Top | 12 mm | 3 – 30 |
| Cable Channel Width | 17 mm | 3 – 40 |
| Cable Channel Depth | 2 mm | 0.5 – 6 |
| Clip Bridge Width | 17 mm | 3 – 40 |
| Clip Bridge Thickness | 2 mm | 0.5 – 6 |
| Clip Bridge Length | 5 mm | 2 – 15 |
| Clip Bridge Count | 3 count | 0 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu