Loading the interactive model…
Interactive 3D model of Camera L-BracketEverything else
Camera L-Bracket
7 views
- Bounding box
- 80.0 × 60.0 × 78.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- August 19, 2026
Download
Free to download and use. See the terms.
The prompt
移除刚刚生成的内容，重新画一个工件，要求如下：设计一个用于安装直径 30 mm 相机的 L 型铝合金支架。底板 80×60×8 mm，竖板高 70 mm、厚 8 mm，底板四角有 M5 通孔，竖板中心有直径 32 mm 通孔，通孔周围有四个 M4 安装孔，孔圆直径 44 mm，底板和竖板之间增加两个 6 mm 厚三角加强筋，所有外边缘倒 R2 圆角。
Parameters
| Name | Value | Range |
|---|---|---|
| Bottom plate length | 80 mm | 40 – 200 |
| Bottom plate width | 60 mm | 30 – 150 |
| Bottom plate thickness | 8 mm | 3 – 20 |
| Vertical plate height | 70 mm | 30 – 150 |
| Vertical plate width | 80 mm | 40 – 200 |
| Vertical plate thickness | 8 mm | 4 – 20 |
| M5 clearance hole diameter | 5.5 mm | 5 – 8 |
| M5 hole X offset from center | 32 mm | 10 – 35 |
| M5 hole Y offset from center | 22 mm | 10 – 40 |
| Camera barrel hole diameter | 32 mm | 10 – 80 |
| M4 clearance hole diameter | 4.5 mm | 4 – 6 |
| M4 bolt circle diameter | 44 mm | 30 – 100 |
| Number of M4 holes | 4 mm | 3 – 8 |
| Rib thickness | 6 mm | 3 – 12 |
| Rib height | 40 mm | 10 – 70 |
| Rib base length | 20 mm | 5 – 50 |
| Rib X offset from center | 24 mm | 10 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS