Brackets and mounts
Camera Housing Sleeve with Hinged Side Door
- Bounding box
- 81.0 × 52.0 × 63.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- August 27, 2026
Download
Free to download and use. See the terms.
The prompt
"Create a horizontal, slide-in camera housing sleeve with an open side entry. The inner cavity dimensions are 74.8 mm long, 48.2 mm high, and 34.1 mm deep (adding 1–2 mm clearance to the camera body). The front panel features a centered rectangular cutout for the front screen and lens. The back panel features a large rectangular cutout for the rear touch screen. The right side wall is solid, while the left side wall is entirely open to slide the camera in. On the front-left edge of the body, include a vertical pin-style hinge. Design a separate matching side door panel that rotates on this hinge to close the left entry. The trailing edge of the door features a snap-fit locking tab that clips securely into a matching recess on the back-left edge of the main body."
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length | 78 mm | 70 – 90 |
| Body Height | 52 mm | 45 – 60 |
| Body Depth | 38 mm | 32 – 45 |
| Wall Thickness | 2 mm | 1 – 3 |
| Cavity Length | 74.8 mm | 70 – 80 |
| Cavity Height | 48.2 mm | 44 – 52 |
| Cavity Depth | 34.1 mm | 30 – 38 |
| Front Cutout Width | 30 mm | 20 – 50 |
| Front Cutout Height | 20 mm | 15 – 40 |
| Back Cutout Width | 40 mm | 30 – 60 |
| Back Cutout Height | 30 mm | 20 – 45 |
| Hinge Diameter | 6 mm | 4 – 8 |
| Hinge Length | 50 mm | 40 – 60 |
| Door Length | 76 mm | 70 – 85 |
| Door Height | 50 mm | 45 – 58 |
| Door Thickness | 3 mm | 2 – 5 |
| Tab Length | 8 mm | 5 – 12 |
| Tab Height | 6 mm | 4 – 10 |
| Tab Protrusion | 2 mm | 1 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent