Everything else
Caliper Jaw Lapping Fixture Body
- Bounding box
- 110.0 × 100.0 × 52.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- October 10, 2026
Download
Free to download and use. See the terms.
The prompt
I want to design machine for lapping the vernier caliper jaws internal + external
Parameters
| Name | Value | Range |
|---|---|---|
| Fixture Length (X) | 110 mm | 60 – 220 |
| Fixture Width (Y) | 100 mm | 60 – 180 |
| Base Plate Thickness | 26 mm | 10 – 60 |
| Corner Fillet R | 6 mm | 0 – 12 |
| Beam Locating Rail Width | 20 mm | 8 – 40 |
| Jaw Relief Height | 4 mm | 1 – 12 |
| Caliper Jaw Reach (assumed) | 20 mm | 5 – 45 |
| Lap Clearance at Jaw Tip | 6 mm | 1 – 25 |
| Clamp Stud Hole Dia (M6 tap) | 5 mm | 2.5 – 12 |
| Clamp Hole Pitch (X) | 30 mm | 10 – 90 |
| Clamp Hole Offset (Y) | 22 mm | 12 – 45 |
| Guide Post Thickness (Y) | 12 mm | 5 – 30 |
| Guide Post Width (X) | 28 mm | 10 – 70 |
| Guide Post Height | 26 mm | 8 – 70 |
| Lap Blade Portal Width | 2.2 mm | 1 – 8 |
| Lap Blade Portal Height | 10 mm | 4 – 30 |
| Base Mounting Hole Dia | 9 mm | 3 – 18 |
| Mounting Hole Offset (X) | 40 mm | 15 – 70 |
| Mounting Hole Offset (Y) | 35 mm | 12 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm