Everything else
Cajonera apilable 4 cajones 240x270x410
- Bounding box
- 240.0 × 270.0 × 410.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- October 9, 2026
Download
Free to download and use. See the terms.
The prompt
Diseñá una cajonera 3D imprimible en PETG, de 240 × 270 × 410 mm de dimensiones exteriores. Tiene 4 cajones apilados verticalmente, con frentes planos y huecos integrados para los dedos. La parte trasera debe estar cerrada con una pared para dar rigidez. Usá paredes de 3 mm y una holgura lateral de 0,5 mm por lado entre cajones y estructura. Separá las piezas en componentes individuales, listos para imprimir y ensamblar. Respetá las dimensiones exteriores totales y evitá geometrías innecesarias.
Parameters
| Name | Value | Range |
|---|---|---|
| Ancho exterior | 240 mm | 100 – 600 |
| Profundidad exterior | 270 mm | 100 – 600 |
| Altura exterior | 410 mm | 150 – 900 |
| Espesor de pared | 3 mm | 1.6 – 8 |
| Cantidad de cajones | 4 u | 1 – 8 |
| Holgura lateral (por lado) | 0.5 mm | 0.1 – 2 |
| Radio esquinas verticales | 1.5 mm | 0 – 3 |
| Espesor del frente | 3 mm | 2 – 8 |
| Alto del cuerpo del cajón | 60 mm | 20 – 200 |
| Ranura de dedos - largo (entre centros) | 60 mm | 20 – 160 |
| Ranura de dedos - alto | 14 mm | 8 – 40 |
| Juego contra pared trasera | 2 mm | 0.5 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm