Café & Social Gathering Jigsaw Puzzle Boards

1 views

Bounding box: 2884.8 × 282 × 6 mm
Engine: 3D Printing B-rep
Parameters: 14
Published: November 4, 2026

Download

Free to download and use. See the terms.

The prompt

no the puzzle boards should each be able to fit 3 pieces together, one soultion piece, one challenge piece, one challenge response piece it should be such that no matter which solution challenge or challenge soluyiotn piece they pick each of the three categories of pieces should fit together in the puzzle board

Parameters

Name	Value	Range
Spacing between parts	370 mm	200 – 800
Board length	330 mm	200 – 400
Board width, piece grid	220 mm	150 – 300
Board thickness, two 3 mm layers	6 mm	4 – 12
MDF lamination layer thickness	3 mm	1 – 5
Board corner radius	3 mm	0 – 12
Border around the pocket grid	6 mm	3 – 20
Wall between pockets	3 mm	2 – 8
Clearance per pocket side	0.4 mm	0.2 – 1
Extra board width for the 3-piece tray	62 mm	45 – 120
Clearance around the interlocked trio	0.5 mm	0.2 – 1.5
Piece thickness	3 mm	2 – 6
Jigsaw tab / socket radius	4 mm	2 – 8
Gap between pieces in a set	6 mm	2 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS