C-Stand Dual Sensor Organizer

Create a clean photorealistic 3D product render of a minimalist freestanding stand for two small white square human-presence sensors. The main structure is a single continuous C-shaped architectural form made from three smooth vertical walls. In top view, the geometry is a squared C: one wide rear wall connected to two shorter side walls at exactly 90-degree angles, with the front completely open. The three walls are perfectly flat and smooth with no ribs, grooves, perforations, patterns, or decorative texture. Use softly rounded outer corners and slightly rounded wall edges. The design should look like a single molded or 3D-printed sculptural object rather than three separate panels. Mount one white square sensor on the OUTSIDE face of the left side wall and one identical white square sensor on the OUTSIDE face of the right side wall. The two sensors therefore point in different directions, approximately 180 degrees apart from each other, while remaining perpendicular to the rear wall. The sensors are attached directly to the vertical walls with no visible brackets, arms, feet, hinges, or mechanical mounts. They should appear flush-mounted or mounted with a very thin concealed adhesive layer. The stand sits on a simple wide rectangular base with softly rounded corners. The base can include a shallow recessed tray in front for keys, wallet, watch, or other small objects, making the entire object function as both a sensor stand and a decorative organizer. Minimalist contemporary industrial design, smooth matte white or warm off-white material, clean geometry, subtle fillets, premium home decor aesthetic, realistic 3D printed product, no visible screws or hardware. Show the object from a three-quarter front perspective so that both side-mounted sensors and the C-shaped geometry are clearly visible. Neutral studio background, soft architectural lighting, realistic shadows, high-end product visualization.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.