Everything else
C-Building Wind-Tunnel Rig (ANSYS-Ready)
- Bounding box
- 152.0 × 76.0 × 47.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- October 3, 2026
Download
Free to download and use. See the terms.
The prompt
give same model which can be used in ansys software simulation
Parameters
| Name | Value | Range |
|---|---|---|
| Building Length | 40 mm | 10 – 200 |
| Building Width | 30 mm | 10 – 200 |
| Building Height | 25 mm | 5 – 200 |
| Building Wall Thickness | 3 mm | 1 – 20 |
| Tunnel Wall Thickness | 3 mm | 1 – 20 |
| Side Clearance (Building to Wall) | 4 mm | 0.5 – 50 |
| Top Clearance (Building to Ceiling) | 5 mm | 0.5 – 50 |
| Tunnel Floor Thickness | 4 mm | 1 – 30 |
| Upstream Development Length | 30 mm | 5 – 300 |
| Downstream Development Length | 50 mm | 5 – 300 |
| Tunnel Outer Corner Radius | 4 mm | 0 – 20 |
| Ground Plate Thickness | 4 mm | 1 – 30 |
| Ground Plate Margin | 10 mm | 0 – 100 |
| Inlet/Outlet Collar Thickness | 6 mm | 1 – 50 |
| Inlet/Outlet Collar Width | 6 mm | 0 – 50 |
| Mesh-Quality Fillet Radius | 2 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm