Enclosures and housings
Bushed-Pin Coupling Flange Half
- Bounding box
- 160.0 × 160.0 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D solid model of a Bushed-Pin Flexible Coupling flange half. - Main Hub: Cylindrical body with a diameter of [80mm] and a length of [60mm]. - Central Bore: Through-hole along the Z-axis with a diameter of [40mm] for the shaft. Include a standard square keyway slot measuring [12mm wide by 4mm deep]. - Flange Disc: Concentric disc extending from the hub. Flange outer diameter is [160mm], and flange thickness is [20mm]. - Pin Holes: Create a pitch circle diameter (PCD) of [120mm] on the flange face. Add [4] evenly spaced counterbored through-holes along this PCD. Each hole has a main diameter of [20mm] for the rubber bush, and a concentric counterbore of [30mm] diameter with a depth of [10mm] to recess the pin head. - Material/Output: Ensure geometry is output as a clean, manifold B-Rep solid suitable for STEP export.
Parameters
| Name | Value | Range |
|---|---|---|
| Hub Diameter | 80 mm | 40 – 120 |
| Hub Length | 60 mm | 20 – 100 |
| Central Bore Diameter | 40 mm | 10 – 80 |
| Keyway Width | 12 mm | 4 – 30 |
| Keyway Depth | 4 mm | 1 – 15 |
| Flange Outer Diameter | 160 mm | 80 – 300 |
| Flange Thickness | 20 mm | 5 – 50 |
| Pitch Circle Diameter | 120 mm | 60 – 250 |
| Pin Hole Diameter | 20 mm | 5 – 50 |
| Counterbore Diameter | 30 mm | 10 – 60 |
| Counterbore Depth | 10 mm | 2 – 20 |
| Number of Pin Holes | 4 | 2 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w