Loading the interactive model…
Interactive 3D model of Busbar-LowerDie AssemblyEverything else
Busbar-LowerDie Assembly
6 views
- Bounding box
- 200.0 × 50.0 × 35.9 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
画一个3D图，铜排宽度50mm，长度200mm，开一个13的孔。画一个下模，凸头带一定圆弧
Parameters
| Name | Value | Range |
|---|---|---|
| Copper busbar length | 200 mm | 20 – 500 |
| Copper busbar width | 50 mm | 10 – 200 |
| Copper busbar thickness | 5 mm | 0.5 – 30 |
| Copper busbar center hole diameter | 13 mm | 1 – 40 |
| Hole X offset from busbar center | 0 mm | -80 – 80 |
| Hole Y offset from busbar center | 0 mm | -20 – 20 |
| Lower die base length | 200 mm | 50 – 500 |
| Lower die base width | 50 mm | 10 – 200 |
| Lower die base height | 30 mm | 5 – 200 |
| Die protrusion base diameter | 12 mm | 2 – 40 |
| Die protrusion dome height | 6 mm | 0.5 – 30 |
| Assembly center X position | 100 mm | 0 – 500 |
| Assembly center Y position | 25 mm | 0 – 300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS