Brackets and mounts
Bus Stop Shelter Assembly
- Bounding box
- 4000.0 × 1600.0 × 3220.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- October 10, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a structural assembly for a modern bus stop shelter with the following geometric components: Base: A flat rectangular base plane to serve as the ground. Central Column: A large vertical cylinder positioned at the center-rear of the base plane to act as the main structural support and water tank. Side Pillars: Two thick, vertical rectangular posts positioned on the far left and far right sides of the base, structurally supporting the outer roof. Canopy (Butterfly Roof): A V-shaped roof consisting of two large rectangular slabs. The outer edges of these slabs rest on the side pillars, and they slope downwards to meet at a central V-gutter directly above the central vertical cylinder. Benches: Two horizontal rectangular slabs acting as seating, spanning between the central cylinder and the side pillars at waist height. Fans: Two short, hollow cylindrical housings mounted horizontally near the top inner face of both side pillars, pointing inwards toward the seating area.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length (X) | 4000 mm | 1000 – 8000 |
| Base Depth (Y) | 1500 mm | 500 – 4000 |
| Base Thickness | 100 mm | 20 – 400 |
| Column Diameter | 500 mm | 100 – 1500 |
| Column Height Above Base | 2550 mm | 300 – 6000 |
| Column Y Position (rear = negative) | -500 mm | -2000 – 0 |
| Pillar Width (X) | 200 mm | 50 – 600 |
| Pillar Depth (Y) | 200 mm | 50 – 600 |
| Pillar Height Above Base | 3000 mm | 500 – 7000 |
| Pillar Centre Offset From Centreline | 1900 mm | 200 – 3900 |
| Roof Horizontal Run (pillar to valley) | 2000 mm | 200 – 3900 |
| Roof Drop To Centre | 500 mm | 50 – 2000 |
| Roof Slab Width (Y) | 1600 mm | 200 – 3000 |
| Roof Slab Thickness | 120 mm | 20 – 400 |
| Roof Y Position | 0 mm | -1500 – 1500 |
| Roof Overlap Past Valley | 100 mm | 0 – 500 |
| Bench Length (X) | 1800 mm | 200 – 3900 |
| Bench Width (Y) | 400 mm | 100 – 1200 |
| Bench Thickness | 80 mm | 20 – 300 |
| Seat Height (Centre Z) | 600 mm | 100 – 2000 |
| Bench Y Position | -200 mm | -1500 – 1500 |
| Fan Housing Outer Dia | 300 mm | 50 – 800 |
| Fan Housing Bore Dia | 260 mm | 20 – 700 |
| Fan Housing Depth | 200 mm | 20 – 800 |
| Fan Housing Centre Height | 2700 mm | 500 – 6500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu