Everything else
Brazilian Real Coin Counting Tray with Marks
- Bounding box
- 148.9 × 140.4 × 16.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing model without changing the trough dimensions. Add counting marks on both side rails of every trough. The marks must indicate groups of 5 coins, with 10 marks per trough. Measure all marks from the internal face of the front stop. Use these distances between consecutive marks: - R$1 trough: 9.75 mm - 50 cents trough: 14.25 mm - 25 cents trough: 11.25 mm - 10 cents trough: 11.15 mm - 5 cents trough: 8.25 mm Each mark must be an engraved transverse line: - 0.8 mm wide - 0.5 mm deep - 3.0 mm long The marks must not enter or obstruct the coin groove.
Parameters
| Name | Value | Range |
|---|---|---|
| R$1 Diameter | 27 mm | 20 – 40 |
| R$1 Thickness | 1.95 mm | 0.5 – 5 |
| 50c Diameter | 23 mm | 15 – 35 |
| 50c Thickness | 2.85 mm | 0.5 – 5 |
| 25c Diameter | 25 mm | 15 – 35 |
| 25c Thickness | 2.25 mm | 0.5 – 5 |
| 10c Diameter | 20 mm | 10 – 30 |
| 10c Thickness | 2.23 mm | 0.5 – 5 |
| 5c Diameter | 22 mm | 10 – 30 |
| 5c Thickness | 1.65 mm | 0.5 – 5 |
| Coins per Trough | 50 | 5 – 100 |
| Material Below Groove | 3 mm | 1 – 10 |
| Outer Wall Thickness | 2.2 mm | 1 – 10 |
| Spacing Between Troughs | 4 mm | 1 – 10 |
| Corner Radius | 6 mm | 1 – 20 |
| Fillet Radius | 1.5 mm | 0.2 – 5 |
| Groove Width Tolerance | 0.6 mm | 0 – 2 |
| Groove Length Extra | 2 mm | 0 – 10 |
| Groove Depth Fraction (of diam) | 0.48 | 0.2 – 0.8 |
| Finger Notch Depth | 5 mm | 1 – 15 |
| Finger Notch Height Fraction (of diam) | 0.4 | 0.1 – 0.7 |
| Mark Width | 0.8 mm | 0.2 – 3 |
| Mark Depth | 0.5 mm | 0.1 – 2 |
| Mark Length | 3 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like