Everything else
Brazilian Coin Tray
- Bounding box
- 68.0 × 133.5 × 12.8 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
On the 50 cents trough only, engrave these cumulative values beside the ten counting marks: 2.50, 5.00, 7.50, 10.00, 12.50, 15.00, 17.50, 20.00, 22.50, 25.00 Use 2.8 mm high sans-serif text, engraved 0.5 mm deep. Align one value with each mark. Do not add a currency symbol beside every value.
Parameters
| Name | Value | Range |
|---|---|---|
| R$1,00 Diameter | 27 mm | 15 – 35 |
| 50 centavos Diameter | 23 mm | 15 – 30 |
| 25 centavos Diameter | 25 mm | 15 – 30 |
| 10 centavos Diameter | 20 mm | 15 – 25 |
| 5 centavos Diameter | 22 mm | 15 – 25 |
| R$1,00 Thickness | 1.95 mm | 0.5 – 5 |
| 50 centavos Thickness | 2.85 mm | 0.5 – 5 |
| 25 centavos Thickness | 2.25 mm | 0.5 – 5 |
| 10 centavos Thickness | 2.23 mm | 0.5 – 5 |
| 5 centavos Thickness | 1.65 mm | 0.5 – 5 |
| Coins per Trough | 20 | 5 – 50 |
| Material Below Pockets | 2 mm | 1 – 10 |
| Outer Wall Thickness | 3 mm | 1 – 10 |
| Spacing Between Troughs | 2 mm | 1 – 10 |
| Corner Radius | 5 mm | 0 – 20 |
| Bottom Fillet Radius | 1 mm | 0 – 5 |
| Coin Width Tolerance | 0.5 mm | 0 – 2 |
| Pocket Length Extra | 5 mm | 0 – 20 |
| Pocket Depth Fraction | 0.4 | 0.2 – 0.8 |
| Finger Notch Depth | 6 mm | 2 – 15 |
| Finger Notch Height Fraction | 0.5 | 0.2 – 0.8 |
| Mark Width | 1 mm | 0.5 – 3 |
| Mark Depth | 1.5 mm | 0.5 – 5 |
| Mark Length | 2 mm | 1 – 10 |
| Text Height | 4.5 mm | 1 – 10 |
| Text Emboss Height | 0.6 mm | 0.1 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like