Brackets and mounts
Bracket with U-Shaped Saddle Seat
- Bounding box
- 268.2 × 266.7 × 520.7 mm
- Engine
- Precision B-rep
- Parameters
- 5
- Published
- August 28, 2026
Download
Free to download and use. See the terms.
The prompt
Design a solid 1/4-inch thick bracket. The top is a flat horizontal plate measuring 5.25 inches deep. Attached to the inner edge of the top plate, the back drops vertically 20.5 inches forming a 90-degree inside corner. Attached to that vertical drop is a U-shaped saddle seat. The saddle seat is exactly 5.5 inches wide on the inside. The entire saddle seat tilts upward at a 22.62 degree angle. Do not include any holes.
Parameters
| Name | Value | Range |
|---|---|---|
| Thickness | 6.35 mm | 3 – 12 |
| Top Plate Depth | 133.35 mm | 50 – 200 |
| Back Height | 520.7 mm | 100 – 800 |
| Saddle Inside Width | 139.7 mm | 50 – 250 |
| Saddle Tilt Angle | 22.62 deg | 0 – 45 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent