Everything else
Bracket with Inclined Reinforcement and Boss
- Bounding box
- 121.5 × 157.0 × 98.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Base: 105 × 98 × 8 mm Esquinas de la base: R15 Agujeros de la base: Ø15 mm (4) Altura del soporte: 70 mm Espesor del soporte: 20 mm Refuerzo inclinado: 10 mm de espesor Parte superior: Largo: 35 mm Extremo redondo: R24 Espesor: 20 mm Agujero superior: Ø24 mm (aproximado) Dos agujeros laterales: Ø24 mm Separación del corte superior e inferior: 15 mm
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 105 mm | 50 – 200 |
| Base Width | 98 mm | 50 – 200 |
| Base Thickness | 8 mm | 2 – 20 |
| Base Corner Radius | 15 mm | 0.5 – 30 |
| Base Hole Diameter | 15 mm | 1 – 30 |
| Base Hole X Offset | 15 mm | 1 – 50 |
| Base Hole Y Offset | 15 mm | 1 – 50 |
| Support Height | 70 mm | 20 – 150 |
| Support Thickness (X) | 20 mm | 5 – 50 |
| Support Width (Y) | 48 mm | 10 – 100 |
| Reinforcement Thickness | 10 mm | 2 – 30 |
| Reinforcement Length | 30 mm | 10 – 80 |
| Boss Straight Length | 35 mm | 10 – 80 |
| Boss Thickness | 20 mm | 5 – 50 |
| Top End Radius | 24 mm | 5 – 40 |
| Top Hole Diameter | 24 mm | 5 – 40 |
| Side Hole Diameter | 24 mm | 5 – 40 |
| Side Hole Offset From Top | 15 mm | 0 – 50 |
| Side Hole Depth | 12 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like