Botanical Floral Name Tag

Redesign the model from scratch. Do not reuse the previous text placement or layout. Create a neat, professional, front-facing rectangular name tag with rounded corners. The design must be symmetrical, balanced, elegant and suitable for a real 3D print. **EXACT BODY:** 100 mm wide × 60 mm tall × 3 mm thick, with 6 mm corner radii. **LAYOUT — FOLLOW THIS EXACTLY:** - Orient the rectangle horizontally, with its 100 mm side left-to-right and its 60 mm side top-to-bottom. - Show the front face straight-on in the preview. - Place one 8 × 15 mm rounded rectangular through-hole at the top centre, with at least 4 mm edge clearance. - Place “Jiyanshi” horizontally, centred and prominent. - Place “9KL” horizontally, centred directly below the name, at approximately half its text size. - Both text lines must be level, evenly spaced and clearly readable. - Add a continuous 2 mm wide border raised 0.8 mm above the surface. - Raise all lettering 1 mm above the surface, with minimum 1.2 mm letter strokes. Do not engrave the text. **MAIN DECORATION — BOTANICAL LAB FLASK:** - Recreate the supplied reference image as a simplified raised 3D relief. - Include one recognisable Erlenmeyer flask with a narrow neck, sloping sides and broad triangular base. - Add four elegant flowers growing from the flask opening, with curved stems and flowing leaves. - Include a few simple raised measurement markings on the flask. - Preserve the natural, delicate botanical composition of the reference, but simplify small details for reliable printing. - Integrate the illustration neatly with the name and class label without overlapping either. - Do not replace the flask and flowers with generic symbols or scattered corner decorations. **SINGLE-COLOUR PRINTING:** All features must be genuine solid 3D geometry in one colour. Use raised contours, petal shapes and natural shadows to create visual detail. No textures, colour effects, flat images, engraved text or floating parts. Keep delicate features at least 1.2 mm thick wherever possible. Ensure the lettering, flowers, leaves, stems, flask and border are securely connected to the tag. **PRINT REQUIREMENTS:** Maintain the exact body dimensions. Use a flat back, watertight manifold geometry and a genuine through-hole. Keep the total height approximately 4 mm maximum. Optimise for an FDM printer with a 0.4 mm nozzle. Inspect the model from directly above and verify the critical dimensions before exporting. Never rotate, distort or scatter the text to make it fit. Produce a clean, professional botanical name tag, not an abstract sculpture. Export a correctly scaled STL and an editable CAD file if supported.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.