Gears and transmission
BOMBARDICUZ Mk I - GA37RG Motor Cradle (revised)
- Bounding box
- 70 × 68.6 × 36 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Revised printable motor saddle for the 37 mm GA37RG 12V 100RPM gearmotor, with open-top cylindrical channel and two M4 adjustable chassis mounting slots.
Parameters
| Name | Value | Range |
|---|---|---|
| Motor and gearbox diameter | 37 mm | 36 – 40 |
| Approximate motor assembly length | 66.6 mm | 60 – 75 |
| Motor clearance | 0.6 mm | 0.2 – 1.5 |
| Base length along chassis | 70 mm | 60 – 90 |
| Base width | 50 mm | 40 – 65 |
| Base thickness | 6 mm | 5 – 10 |
| Rail mounting slot length | 24 mm | 16 – 36 |
| Rail mounting slot width | 4.6 mm | 4 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled