Gears and transmission
BOMBARDICUZ Mk I Complete Tracked Suspension Concept
- Bounding box
- 400 × 279.5 × 90.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Conceptual full tracked rover chassis with two rubber-like printable track loops, drive sprockets, idlers, three swing-arm bogie rollers per side and simplified spring packaging. Geometry is a fit/layout prototype, not a validated drive system.
Parameters
| Name | Value | Range |
|---|---|---|
| Central chassis length | 360 mm | 320 – 420 |
| Central chassis width | 180 mm | 160 – 220 |
| Track module centre from vehicle centre | 112 mm | 100 – 130 |
| Track belt width | 28 mm | 20 – 40 |
| Track belt thickness | 7 mm | 5 – 10 |
| Track outer length | 400 mm | 360 – 440 |
| Track outer height | 90 mm | 70 – 110 |
| Drive sprocket radius | 32 mm | 25 – 40 |
| Front idler radius | 32 mm | 25 – 40 |
| Suspension roller radius | 17 mm | 12 – 22 |
| Number of suspension rollers per side | 3 mm | 2 – 4 |
| Swing arm length | 42 mm | 30 – 60 |
| Swing arm thickness | 8 mm | 6 – 12 |
| Spring visual diameter | 12 mm | 8 – 18 |
| Spring visual length | 25 mm | 15 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled