Brackets and mounts
Bollard Film Holder System
- Bounding box
- 177.6 × 127.0 × 812.8 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D CAD assembly of a stainless steel bollard film holder system consisting of a main cylinder, a semi-circular platform, and three triangular support gussets. 1. MAIN BOLLARD: - Create a vertical cylinder with an Outer Diameter (OD) of 2.00 inches and a total length of 32.00 inches. - Establish the bottom end as Z = 0. 2. SEMI-CIRCULAR PLATFORM: - Create a flat, semi-circular plate with a thickness of 1/8 inch (0.125 inches). - The outer diameter (OD) extent must be exactly 5.00 inches. - Cut a concentric semi-circular hole in the center with an inner diameter of 2.00 inches to sleeve perfectly around the vertical cylinder. - Orientation & Placement: Position this platform horizontally around the cylinder with the flat edge facing forward. Set the top surface of this platform at exactly Z = 19.00 inches. - Apply a 0.05-inch edge fillet (rounding) along the outer curved boundary of the semi-circle to eliminate sharp edges for ergonomic safety. 3. SUPPORT GUSSETS (QUANTITY: 3): - Create three identical right-triangular gusset plates with a thickness of 1/8 inch. - Each triangular gusset must have a vertical leg length of 3.00 inches and a horizontal leg length of 3.00 inches. - Position the top 3.00-inch horizontal leg flush against the underside of the platform (terminating at Z = 18.875 inches). - Space the three gussets radially around the semi-circle. Place the center gusset exactly at the 90-degree midpoint. Place the right gusset at 30 degrees. Place the left gusset at 150 degrees. - Flush the 3-inch vertical leg of each triangle flat against the outer curvature of the 2-inch cylinder. 4. MATERIAL & MANUFACTURING METADATA: - Assign the material for all components as Grade 304 Stainless Steel with a Brushed (No. 4) finish. - Generate standard 1/8-inch continuous fillet welds at all joint intersections where the gussets meet the cylinder and the underside of the platform.
Parameters
| Name | Value | Range |
|---|---|---|
| Bollard Outer Diameter | 50.8 mm | 25 – 101.6 |
| Bollard Length | 812.8 mm | 200 – 1500 |
| Platform Outer Diameter | 127 mm | 60 – 250 |
| Platform Thickness | 3.18 mm | 1 – 10 |
| Platform Top Z | 482.6 mm | 100 – 800 |
| Platform Edge Fillet | 1.27 mm | 0.1 – 5 |
| Gusset Vertical Leg | 76.2 mm | 20 – 150 |
| Gusset Horizontal Leg | 76.2 mm | 20 – 150 |
| Gusset Thickness | 3.18 mm | 1 – 10 |
| Weld Fillet Radius | 3.18 mm | 0.5 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu