Everything else
BOGOT Peatland Rover – Assembled
- Bounding box
- 400.0 × 428.0 × 418.0 mm
- Engine
- Precision B-rep
- Parameters
- 68
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Can you put it together
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 260 mm | 180 – 400 |
| Chassis Width | 180 mm | 120 – 300 |
| Chassis Height | 55 mm | 30 – 120 |
| Chassis Wall | 4 mm | 2 – 8 |
| Ride Height (Chassis Bottom) | 55 mm | 20 – 150 |
| Electronics Bay Length | 170 mm | 80 – 300 |
| Electronics Bay Width | 120 mm | 60 – 220 |
| Electronics Bay Depth | 30 mm | 10 – 70 |
| Mounting Boss Diameter | 12 mm | 6 – 24 |
| Mounting Boss Height | 6 mm | 3 – 15 |
| Mounting Hole (M3) | 3.4 mm | 2 – 8 |
| Chassis Cable Pass Dia | 12 mm | 5 – 30 |
| Lid Length | 260 mm | 180 – 400 |
| Lid Width | 180 mm | 120 – 300 |
| Lid Thickness | 8 mm | 4 – 20 |
| Gasket Groove Width | 3 mm | 1 – 8 |
| Gasket Groove Depth | 2 mm | 0.5 – 6 |
| Lid Screw Hole | 3.4 mm | 2 – 8 |
| Battery Tray Length | 160 mm | 80 – 300 |
| Battery Tray Width | 120 mm | 60 – 220 |
| Battery Tray Height | 45 mm | 20 – 90 |
| Battery Tray Wall | 3 mm | 1.6 – 8 |
| Strap Slot Length | 100 mm | 30 – 200 |
| Strap Slot Width | 8 mm | 3 – 20 |
| Battery Tray Mount Hole | 3.4 mm | 2 – 8 |
| Suspension Arm Length | 90 mm | 50 – 180 |
| Suspension Arm Width | 30 mm | 16 – 60 |
| Suspension Arm Height | 26 mm | 14 – 60 |
| Suspension Arm Wall | 3 mm | 1.6 – 8 |
| Internal Cable Route Dia | 10 mm | 4 – 24 |
| Pivot Boss Diameter | 26 mm | 12 – 50 |
| Pivot Bore (M8 Bolt) | 8 mm | 3 – 16 |
| Clevis/Axle Hole Dia | 8 mm | 3 – 16 |
| Wheel Diameter | 180 mm | 100 – 300 |
| Wheel Width | 60 mm | 25 – 120 |
| Wheel Hub Diameter | 50 mm | 20 – 100 |
| Wheel Bore | 10 mm | 4 – 30 |
| Motor Bolt Count | 6 count | 3 – 8 |
| Motor Bolt Circle Dia | 35 mm | 15 – 70 |
| Motor Bolt Hole Dia | 4.5 mm | 2 – 8 |
| Drill Frame Height | 300 mm | 150 – 500 |
| Drill Frame Width (X) | 120 mm | 60 – 240 |
| Drill Frame Depth (Y) | 140 mm | 60 – 260 |
| Guide Rail Diameter | 12 mm | 6 – 30 |
| Guide Rail Spacing | 70 mm | 30 – 160 |
| Frame Mount Hole (M5) | 5.2 mm | 2 – 10 |
| Carriage Length | 90 mm | 40 – 180 |
| Carriage Width | 80 mm | 40 – 160 |
| Carriage Thickness | 10 mm | 4 – 25 |
| Carriage Bearing Bore | 12.2 mm | 6 – 30 |
| Carriage Motor Hole | 4.5 mm | 2 – 10 |
| Motor Mount Plate Size | 60 mm | 30 – 120 |
| Motor Mount Thickness | 6 mm | 3 – 15 |
| Motor Slot Offset | 15 mm | 5 – 45 |
| Motor Shaft Hole Dia | 30 mm | 8 – 60 |
| Motor Slot Length | 20 mm | 8 – 45 |
| Motor Slot Width | 5 mm | 2 – 12 |
| Auger Flight Diameter | 35 mm | 15 – 90 |
| Auger Length | 150 mm | 60 – 300 |
| Auger Flight Pitch | 40 mm | 15 – 100 |
| Auger Coupling Dia | 25 mm | 10 – 60 |
| Stabilizer Pad Length | 70 mm | 30 – 150 |
| Stabilizer Pad Width | 50 mm | 20 – 120 |
| Stabilizer Pad Thickness | 10 mm | 4 – 25 |
| Stabilizer Leg Height | 108 mm | 30 – 250 |
| Stabilizer Leg Width | 24 mm | 10 – 60 |
| Foot Mount Hole (M5) | 5.2 mm | 2 – 10 |
| Stabilizer Offset from Drill Axis | 4 mm | 0 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Flip-Top Bottle Cap with Center Hole
我要生成類似瓶蓋跟市售一模一樣 可以上掀蓋然後打開中間會有一個洞
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
