Enclosures and housings
Boat Trailer Frame
- Bounding box
- 3430.1 × 2206.3 × 1288.8 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- September 10, 2026
Download
Free to download and use. See the terms.
The prompt
remove the tool box and make the front tapper into the centre then a some rails for the boat to sit on. do not add the boat. make the front hitch go up slightly to be able to attatch to a car
Parameters
| Name | Value | Range |
|---|---|---|
| Trailer Length | 3000 mm | 2000 – 5000 |
| Trailer Width | 1500 mm | 1000 – 2500 |
| Frame Tube Size | 50 mm | 30 – 100 |
| Frame Height | 300 mm | 200 – 500 |
| Wheel Diameter | 500 mm | 300 – 800 |
| Wheel Width | 150 mm | 100 – 300 |
| Axle Offset from Center | 200 mm | 0 – 500 |
| Hitch Length | 400 mm | 200 – 800 |
| Hitch Height | 450 mm | 300 – 700 |
| Front Taper Angle | 30 deg | 10 – 60 |
| Boat Rail Length | 2000 mm | 1500 – 3000 |
| Boat Rail Spacing | 600 mm | 400 – 1000 |
| Boat Rail Height | 100 mm | 50 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w