Gears and transmission
BMX Bike Assembly
- Bounding box
- 1408.0 × 1200.0 × 819.1 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
can you make me a cad that is a bmx bike that has pedals and everything make it just white with the gears and everything with more of like a longer seat that is more like a bench parrallel like that goes inbetween your legs
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Length (Wheelbase) | 900 mm | 600 – 1500 |
| Bottom Bracket Height (from ground) | 300 mm | 200 – 500 |
| Wheel (Tire) Diameter | 508 mm | 400 – 700 |
| Wheel (Tire) Width | 50 mm | 30 – 100 |
| Fork Length | 350 mm | 200 – 500 |
| Frame Tube Diameter | 30 mm | 15 – 50 |
| Seat Length | 400 mm | 200 – 600 |
| Seat Width | 80 mm | 40 – 120 |
| Crank Arm Length | 175 mm | 100 – 200 |
| Chainring Diameter | 150 mm | 80 – 200 |
| Rear Sprocket Diameter | 50 mm | 30 – 80 |
| Handlebar Width | 600 mm | 400 – 800 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled