Everything else
BMO Enclosure (LCD + NFC + ESP32 + Pi)
- Bounding box
- 180.0 × 80.0 × 138.0 mm
- Engine
- Precision B-rep
- Parameters
- 38
- Published
- September 21, 2026
Download
Free to download and use. See the terms.
The prompt
Make Me A BMO Schematic From Adevnture Time That Can Fit An NFC READER, ESP32, RASPBERRY PI AND LCD SCREEN
Parameters
| Name | Value | Range |
|---|---|---|
| Body Width (X) | 140 mm | 60 – 260 |
| Body Height (Z) | 120 mm | 60 – 260 |
| Body Depth (Y) | 80 mm | 40 – 200 |
| Corner Radius | 10 mm | 0 – 40 |
| Shell Wall | 3 mm | 1.2 – 8 |
| Front Panel Thickness | 6 mm | 3 – 15 |
| LCD Window Width | 74 mm | 20 – 180 |
| LCD Window Height | 49 mm | 15 – 120 |
| Bezel Recess Width | 88 mm | 25 – 200 |
| Bezel Recess Height | 58 mm | 20 – 140 |
| Bezel Recess Depth | 3 mm | 0 – 6 |
| Screen Centre Height | 20 mm | -50 – 50 |
| NFC Pad Diameter | 40 mm | 10 – 80 |
| NFC Recess Depth | 2 mm | 0 – 5 |
| NFC Cable Pass Hole | 8 mm | 2 – 30 |
| NFC Pad Centre Height | -34 mm | -70 – 40 |
| Pi Hole Spacing X | 58 mm | 10 – 120 |
| Pi Hole Spacing Y | 49 mm | 10 – 100 |
| Pi Lateral Offset | -10 mm | -60 – 60 |
| Pi Standoff Diameter | 6.5 mm | 3 – 15 |
| Pi Standoff Height | 6 mm | 2 – 25 |
| ESP32 Hole Spacing X | 21 mm | 8 – 60 |
| ESP32 Hole Spacing Y | 45 mm | 8 – 80 |
| ESP32 Lateral Offset | 50 mm | 0 – 65 |
| ESP32 Standoff Diameter | 6 mm | 3 – 15 |
| ESP32 Standoff Height | 6 mm | 2 – 25 |
| Screw Pilot Hole Dia | 2.7 mm | 1 – 6 |
| Arm Diameter | 14 mm | 0 – 40 |
| Arm Length | 22 mm | 0 – 80 |
| Arm Height | 0 mm | -55 – 55 |
| Leg Diameter | 16 mm | 0 – 40 |
| Leg Length | 20 mm | 0 – 80 |
| Leg Spacing | 84 mm | 0 – 140 |
| Leg Depth Offset | 5 mm | -40 – 40 |
| Vent Slot Count | 5 mm | 0 – 15 |
| Vent Slot Width | 3 mm | 1 – 20 |
| Vent Slot Length | 50 mm | 5 – 90 |
| Vent Slot Pitch | 12 mm | 3 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm