Everything else
Blower-Tungku System
- Bounding box
- 2000.0 × 2095.0 × 1185.0 mm
- Engine
- Precision B-rep
- Parameters
- 37
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
buatkan desain gambar lengkap 2d dan 3d dari sebuah blower yang terhubung dengan pipa dan ujung pipa satuya terhubug dengan tungku. Tolong buatkan dengan detail dan lengkap sehingga saya bisa melakukan analisis CFD
Parameters
| Name | Value | Range |
|---|---|---|
| Volute Outer Dia | 300 mm | 200 – 500 |
| Volute Width | 80 mm | 40 – 200 |
| Outlet Box Length | 120 mm | 50 – 300 |
| Impeller Outer Dia | 260 mm | 150 – 500 |
| Impeller Width | 60 mm | 30 – 200 |
| Hub Dia | 60 mm | 20 – 100 |
| Blade Count | 12 | 4 – 20 |
| Blade Thickness | 3 mm | 1 – 10 |
| Shaft Diameter | 25 mm | 10 – 50 |
| Shaft Length | 150 mm | 50 – 400 |
| Motor Diameter | 120 mm | 60 – 250 |
| Motor Length | 180 mm | 100 – 400 |
| Inlet Duct Inlet Dia | 180 mm | 100 – 300 |
| Inlet Duct Outlet Dia | 140 mm | 80 – 250 |
| Inlet Duct Length | 80 mm | 30 – 200 |
| Transition Rect Width (X) | 80 mm | 40 – 200 |
| Transition Rect Height (Z) | 120 mm | 60 – 250 |
| Transition Pipe Dia | 130 mm | 80 – 300 |
| Transition Length | 120 mm | 50 – 300 |
| Pipe Inner Dia | 130 mm | 60 – 300 |
| Pipe Wall Thickness | 5 mm | 2 – 20 |
| Pipe Length | 750 mm | 200 – 2000 |
| Furnace Outer Width (X) | 500 mm | 200 – 1000 |
| Furnace Outer Depth (Y) | 500 mm | 200 – 1000 |
| Furnace Outer Height (Z) | 700 mm | 300 – 1500 |
| Furnace Wall Thickness | 50 mm | 20 – 150 |
| Nozzle Inner Dia | 130 mm | 60 – 300 |
| Nozzle Wall Thickness | 5 mm | 2 – 20 |
| Nozzle Length | 60 mm | 20 – 200 |
| Stack Inner Dia | 180 mm | 100 – 400 |
| Stack Wall Thickness | 5 mm | 2 – 20 |
| Stack Height | 400 mm | 100 – 1000 |
| Frame Length (Y) | 2000 mm | 500 – 5000 |
| Frame Width (X) | 500 mm | 200 – 1000 |
| Frame Height (Z) | 80 mm | 40 – 200 |
| Blower Center Y | 400 mm | 100 – 1000 |
| Pipe Center Z | 200 mm | 100 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like