Blister Packing Machine

Create a single assembled 3D model of an intermittent-motion combination blister packing machine, sized approximately 3000 mm long (X), 800 mm wide (Y) and 1750 mm tall (Z), all units in millimetres, origin at one bottom corner with length along +X and height along +Z. Base: a welded rectangular frame of 60 mm square box legs at the four corners, joined by lower and mid horizontal cross-members, standing on adjustable feet, carrying a flat stainless steel deck plate 3000 x 800 x 22 mm at a height of 900 mm from the floor. On top of the deck, arrange these processing stations in a row along the +X direction, evenly spaced, each as a distinct block mounted to the deck: 1. A film unwind reel (a horizontal roll 300 mm diameter on a shaft) with two guide rollers, at the left end. 2. A forming station: a pair of stacked rectangular plates 250 x 200 x 40 mm on four vertical guide pillars, with a vertical opening gap between them. 3. A filling station: an inverted-pyramid hopper 300 x 300 mm tapering down to a 60 mm outlet above the deck. 4. A sealing station: another pair of stacked plates 250 x 200 x 30 mm on guide pillars, with a second small foil reel above. 5. A punching station: a stacked punch-and-die plate set 260 x 210 x 25 mm at the right end, with a waste-web reel. Enclose the lower half of the frame with flat stainless steel side panels and one hinged door with a rectangular acrylic viewing window on the front. At the right end, attach a tall rectangular control cabinet 600 x 400 x 1600 mm with a touchscreen HMI panel on a swing arm. Render everything as one connected machine assembly in a clean industrial stainless-steel style.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.