Brackets and mounts
BirdID Logger Enclosure
- Bounding box
- 144.0 × 124.9 × 45.0 mm
- Engine
- Precision B-rep
- Parameters
- 56
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
FDM-printable outdoor enclosure for the BirdID bird-sound logger (ESP32-S3 Feather + Adalogger FeatherWing, INMP441 mic, 70x56x12 battery bay). Separate body, lid, removable electronics tray and removable mic bracket; 4-screw lid with gasket groove and alignment lip; acoustic port with membrane seat and foam spigot; rear strap loops. layout=0 assembled, layout=1 print orientation.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout (0 assembled, 1 print) | 0 | 0 – 1 |
| Show reference envelopes | 1 | 0 – 1 |
| Cavity width (x) | 110 mm | 90 – 160 |
| Cavity height (y) | 95 mm | 80 – 150 |
| Usable depth (rear wall to lid lip) | 35 mm | 25 – 60 |
| Cavity corner radius | 3 mm | 1 – 8 |
| Side wall | 3 mm | 2 – 5 |
| Rear wall | 3 mm | 2 – 5 |
| Flange width from cavity edge | 12 mm | 9 – 20 |
| Flange thickness | 5 mm | 3 – 10 |
| Lid thickness | 3 mm | 2 – 6 |
| Lid alignment lip depth | 4 mm | 2 – 8 |
| Lid lip thickness | 1.6 mm | 1 – 3 |
| Lip clearance per side | 0.3 mm | 0.1 – 0.8 |
| Gasket groove width | 2.6 mm | 1.5 – 4 |
| Gasket groove depth | 1.5 mm | 0.8 – 3 |
| Groove centreline offset from cavity | 4.5 mm | 3.5 – 8 |
| Lid screw offset from cavity corner | 7 mm | 6 – 12 |
| Screw column radius | 4.5 mm | 3.5 – 6 |
| Lid screw clearance hole | 3.4 mm | 2.2 – 5 |
| Insert / pilot hole dia (M3 insert) | 4 mm | 2 – 5.5 |
| Insert hole depth | 6 mm | 3 – 12 |
| Feather PCB left edge x | 8 mm | 5 – 20 |
| Feather PCB bottom edge y | 23 mm | 15 – 35 |
| Tray thickness | 2 mm | 1.5 – 4 |
| Tray boss height above rear wall | 4 mm | 3 – 8 |
| Tray screw clearance hole | 3.4 mm | 2.2 – 4.5 |
| Feather standoff above tray (min 3) | 4 mm | 3 – 12 |
| Stack height reserve above tray (unconfirmed) | 25 mm | 15 – 30 |
| Feather post diameter | 4.6 mm | 3.6 – 5 |
| Feather post pilot (M2 self-tap) | 1.6 mm | 1.4 – 3.2 |
| Battery bay left x | 42 mm | 36 – 50 |
| Battery bay bottom y | 22 mm | 15 – 30 |
| Battery bay width (x) | 56 mm | 30 – 60 |
| Battery bay length (y) | 70 mm | 30 – 70 |
| Battery bay depth (z) | 12 mm | 5 – 25 |
| Battery strap opening | 22 mm | 10 – 26 |
| Battery strap centre y | 52 mm | 36 – 75 |
| Acoustic port x | 72.5 mm | 62 – 83 |
| Acoustic port z | 15 mm | 12 – 22 |
| Acoustic port dia | 2 mm | 1 – 4 |
| Mic PCB size (unconfirmed) | 14 mm | 10 – 20 |
| Mic PCB thickness | 1 mm | 0.6 – 1.8 |
| Gasket seat pad height | 1 mm | 0.5 – 3 |
| Mic gasket compressed thickness | 1 mm | 0.3 – 3 |
| Mic bracket boss height | 4 mm | 3 – 6 |
| Mic bracket slot adjustment (+/-) | 2 mm | 0.5 – 3 |
| Membrane seat / foam spigot dia | 14 mm | 10 – 20 |
| Spigot length | 4 mm | 2.5 – 10 |
| Foam retention groove width | 1.2 mm | 0.8 – 2.5 |
| Foam retention groove depth | 0.8 mm | 0.4 – 1.5 |
| Strap slot length | 22 mm | 15 – 40 |
| Strap slot width | 3 mm | 2 – 6 |
| Strap loop projection | 14 mm | 11 – 22 |
| Strap loop length | 36 mm | 28 – 60 |
| Strap loop height from rear | 12 mm | 6 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu