Bird Monitoring Enclosure

1 views

Bounding box: 200 × 140 × 53 mm
Engine: 3D Printing B-rep
Parameters: 21
Published: November 5, 2026

Download

Free to download and use. See the terms.

The prompt

everything is good but increase the size of holes what you gave at the wall and give two holes at the middle of base

Parameters

Name	Value	Range
Outer width	200 mm	100 – 400
Outer depth	140 mm	80 – 300
Body height	50 mm	30 – 120
Wall thickness	3 mm	1.2 – 6
Base thickness	4 mm	2 – 10
Corner radius	6 mm	0 – 20
Lid thickness	3 mm	1.5 – 8
Post center inset from outer edge	15 mm	8 – 40
Post diameter	8 mm	5 – 15
M3 pilot hole diameter	2.6 mm	2 – 4
Lid screw clearance hole	3.4 mm	3 – 5
Bottom mounting hole diameter	4 mm	3 – 8
Mounting hole inset from outer edge	8 mm	4 – 25
Middle base hole diameter	8 mm	3 – 20
Spacing between middle base holes	40 mm	10 – 120
Cable entry hole diameter	14 mm	4 – 30
Cable hole X position	-50 mm	-90 – 90
Cable hole Z position	25 mm	8 – 42
Antenna cable hole diameter	12 mm	4 – 26
Antenna hole Y position	20 mm	-60 – 60
Antenna hole Z position	25 mm	8 – 42

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS