Everything else
Bionic Eye Assembly (Exploded/Assembled + Animation)
- Bounding box
- 108.9 × 22.0 × 40.9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 48
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
Make them full able to be used as a blueprint, no simplified versions. All wiring and everything, make 2 modes with an animation. Disassembled and assembled and make it assemble itself and disassemble itself
Parameters
| Name | Value | Range |
|---|---|---|
| Spacing between parts in the exploded row | 40 mm | 25 – 80 |
| 0 = disassembled row, 1 = assembled | 1 mm | 0 – 1 |
| 0 = static, 1 = assemble/disassemble loop | 0 mm | 0 – 1 |
| Overlap between assembled parts | 0.8 mm | 0.2 – 2.5 |
| Housing outer sphere diameter | 24 mm | 16 – 40 |
| Housing shell wall thickness | 2 mm | 1.2 – 4 |
| Front optical opening diameter | 12 mm | 6 – 20 |
| Rear opening for the optic nerve | 6 mm | 3 – 12 |
| Flat base diameter the housing sits on | 10 mm | 4 – 20 |
| Number of internal mounting ribs | 4 mm | 2 – 8 |
| Internal rib thickness | 1.5 mm | 0.8 – 3 |
| Dome base diameter | 12 mm | 8 – 20 |
| Dome depth / height | 4 mm | 2 – 8 |
| Snap-fit rim height | 1.2 mm | 0.6 – 3 |
| Iris ring outer diameter | 10 mm | 6 – 20 |
| Iris aperture inner diameter | 5 mm | 2 – 14 |
| Iris ring thickness | 1.5 mm | 0.8 – 4 |
| Lens barrel outer diameter | 8 mm | 5 – 14 |
| Lens barrel length | 6 mm | 3 – 16 |
| Lens barrel wall thickness | 1.2 mm | 0.8 – 3 |
| Number of lens elements in the barrel | 3 mm | 2 – 5 |
| Retina array diameter | 12 mm | 6 – 20 |
| Retina array thickness | 1 mm | 0.6 – 3 |
| Retina curvature radius | 20 mm | 12 – 60 |
| IR ring outer diameter | 14 mm | 8 – 24 |
| IR ring inner diameter | 10 mm | 4 – 18 |
| IR ring thickness | 2 mm | 1 – 5 |
| Number of IR emitters | 6 mm | 3 – 12 |
| IR emitter dome diameter | 2.4 mm | 1.5 – 4 |
| Actuator ring outer diameter | 11 mm | 7 – 20 |
| Actuator ring inner diameter | 8 mm | 4 – 16 |
| Actuator ring thickness | 2 mm | 1 – 5 |
| Number of piezo segment slots | 4 mm | 2 – 8 |
| Processor board length | 10 mm | 5 – 20 |
| Processor board width | 10 mm | 5 – 20 |
| Processor module total height | 3 mm | 1.5 – 8 |
| Connector body diameter | 6 mm | 3 – 12 |
| Connector length | 8 mm | 4 – 20 |
| Number of nerve contact pads | 6 mm | 3 – 12 |
| Coil ring outer diameter | 15 mm | 8 – 26 |
| Coil ring inner diameter | 12 mm | 5 – 22 |
| Coil ring thickness | 1 mm | 0.6 – 4 |
| Conductor trace width | 0.7 mm | 0.4 – 1.6 |
| Conductor trace thickness | 0.5 mm | 0.3 – 1 |
| Wire bundle diameter | 1.4 mm | 1 – 2.5 |
| Nerve fibre / wire slot count | 8 mm | 4 – 16 |
| Processor contact pad count | 6 mm | 4 – 16 |
| Insulation gap around wire traces | 0.3 mm | 0.2 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
DC 24V DALI SLIM LED Sürücü Gövdesi (360 mm)
BU REFERANSA GÖRE REVİZE ET
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn