Everything else
Biomimetic Ray Main Chassis
- Bounding box
- 80.0 × 86.0 × 12.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- September 26, 2026
Download
Free to download and use. See the terms.
The prompt
创建一个仿生机械魟鱼主体结构。 要求： 1. 中央安装两个平行传动轴 2. 左右两侧安装柔性翼连接机构 3. 中间安装齿轮传动结构 4. 所有零件适合3D打印 5. 输出STEP装配模型 6. 零件需要分开
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length | 80 mm | 40 – 150 |
| Body Width | 50 mm | 30 – 100 |
| Body Thickness | 12 mm | 4 – 30 |
| Shaft Center Distance | 24 mm | 10 – 40 |
| Shaft Bore Diameter | 6 mm | 3 – 12 |
| Gear Cavity Diameter | 16 mm | 8 – 30 |
| Gear Cavity Depth | 5 mm | 1 – 10 |
| Wing Flange Length | 18 mm | 8 – 40 |
| Wing Flange Width | 15 mm | 6 – 30 |
| Hinge Hole Diameter | 4 mm | 2 – 8 |
| Hinge Hole Spacing | 8 mm | 3 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm