Everything else
Biltema Work Wall Phone Holder (tilted back)
- Bounding box
- 89 × 35.4 × 110 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
make so the phone inside is on a tilt back so its more secure
Parameters
| Name | Value | Range |
|---|---|---|
| Phone width incl. case | 78 mm | 50 – 110 |
| Phone thickness incl. case | 12 mm | 5 – 25 |
| Sliding clearance per side | 1.5 mm | 0.5 – 4 |
| Backward lean of the phone | 6 deg | 0 – 12 |
| Back plate height | 110 mm | 60 – 200 |
| Back plate thickness | 6 mm | 3 – 10 |
| Side wall thickness | 4 mm | 2 – 8 |
| Side wall height at the back | 34 mm | 12 – 70 |
| Front lip thickness | 5 mm | 2 – 10 |
| Front lip height | 16 mm | 8 – 40 |
| Shelf thickness | 6 mm | 3 – 10 |
| Charging cable slot width, 0 = none | 16 mm | 0 – 40 |
| Back plate corner radius | 4 mm | 0 – 12 |
| Vertical spacing of the two screws | 50 mm | 10 – 120 |
| Screw clearance hole dia | 4.5 mm | 3 – 6 |
| Countersink head dia for M4 flat head | 8.6 mm | 5 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm