Bike Rear Radar Detector Case (ESP32 + mmWave)

1 views

Bounding box: 64 × 83.7 × 29 mm
Engine: 3D Printing B-rep
Parameters: 22
Published: November 14, 2026

Download

Free to download and use. See the terms.

The prompt

i need to have a small decice fitr esp 32 _ radar deteactor in the back on a bike,

Parameters

Name	Value	Range
Width - X	64 mm	40 – 120
Depth - Y	42 mm	30 – 100
Height - Z	26 mm	16 – 60
Wall thickness	2.2 mm	1.2 – 5
Floor thickness	2.4 mm	1.2 – 6
Corner radius	5 mm	1 – 15
ESP32 board width	55 mm	20 – 110
ESP32 board depth	28 mm	15 – 80
Standoff height	5 mm	2 – 12
Window width	26 mm	8 – 60
Window height	16 mm	6 – 40
Window centre height	13 mm	4 – 50
Window recess depth	1.2 mm	0.6 – 3
Cable hole diameter	7 mm	3 – 16
Lid thickness	3 mm	2 – 6
Lid lip engagement	4 mm	1 – 8
Sliding clearance	0.25 mm	0.1 – 0.5
Seat post diameter	27.2 mm	22 – 34
Clamp height	18 mm	10 – 40
Clamp radial wall	4.1 mm	2.5 – 8
Clamp slit width	4 mm	2 – 8
Clamp bolt hole diameter	4.5 mm	3 – 8

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS