Brackets and mounts
Bicycle Phone Cradle - CMF Phone 1
- Bounding box
- 88.5 × 176.2 × 13.3 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rigid bicycle phone cradle for CMF Phone 1. The cradle mounts to an existing bottle cage adapter using two M5 bolts spaced 64 mm apart. Phone dimensions: - 163.66 mm height - 77.46 mm width - 7.8 mm thickness Requirements: - The phone slides in from the top. - Two deep bottom supports hold the phone's weight. - Two flexible locking tabs at the top secure the phone and prevent it from falling out. - Side guides keep the phone centered. - Clearance: 0.5 mm. - Large camera cutout. - Opening for the CMF Phone 1 accessory wheel. - Full access to USB-C port, speakers, microphone and buttons. - Two mounting holes: - 5.5 mm diameter - 64 mm spacing - 9 mm counterbore - 5 mm counterbore depth - 5 mm thick mounting plate. - 4 mm walls. - Large fillets for strength. - Optimized for PLA. - Printable without supports. - Designed to withstand bicycle vibrations. - Parametric CAD model.
Parameters
| Name | Value | Range |
|---|---|---|
| Phone Width | 77.46 mm | 60 – 100 |
| Phone Height | 163.66 mm | 130 – 200 |
| Phone Thickness | 7.8 mm | 5 – 15 |
| Clearance | 0.5 mm | 0.1 – 2 |
| Wall Thickness | 4 mm | 2 – 8 |
| Mounting Plate Thickness | 5 mm | 3 – 10 |
| Mount Hole Diameter | 5.5 mm | 4 – 8 |
| Mount Hole Spacing | 64 mm | 50 – 80 |
| Counterbore Diameter | 9 mm | 7 – 12 |
| Counterbore Depth | 5 mm | 2 – 8 |
| Bottom Support Depth | 8 mm | 5 – 15 |
| Tab Width | 10 mm | 5 – 20 |
| Tab Extension (inward) | 5 mm | 2 – 10 |
| Top Margin (wall above phone) | 4 mm | 2 – 10 |
| Fillet Radius | 2 mm | 1 – 3 |
| Camera Cutout Width | 50 mm | 30 – 70 |
| Camera Cutout Height | 30 mm | 20 – 60 |
| Accessory Wheel Diameter | 20 mm | 10 – 30 |
| Bottom Cutout Width (USB-C) | 40 mm | 20 – 60 |
| Side Cutout Width (buttons) | 5 mm | 3 – 15 |
| Side Cutout Height | 20 mm | 10 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent