Brackets and mounts
Bicycle Handlebar Extender
- Bounding box
- 400.0 × 30.0 × 220.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
I would like to create a bicycle handle extender. - Two Double sided clamp(One each side of the handle), one clamp on the handle and the other side is the bottom bar of the extender. - The centre of the botom bar of the extender has a T joint and the Aluminium tube connected to . It will be a telescopic tube of 4 Inches and (threee piecesnlike that, when opens the telescopic tubes, it will be 12 inches.there will be a spring pin lock between all three) - Top Tube is connecte tothe anotgher T join and the top part of the T join is connected with another BAR.
Parameters
| Name | Value | Range |
|---|---|---|
| Vertical Offset (handlebar to bottom bar) | 20 mm | 15 – 30 |
| T-Joint Size | 30 mm | 20 – 40 |
| Clamp Length (along bars) | 40 mm | 30 – 60 |
| Clamp Width (across bars) | 20 mm | 10 – 30 |
| Clamp Height | 45 mm | 30 – 60 |
| Handlebar Bore Diameter | 22 mm | 20 – 26 |
| Bottom Bar Length | 200 mm | 150 – 300 |
| Bottom Bar Diameter | 20 mm | 15 – 25 |
| Outer Tube OD | 25 mm | 20 – 30 |
| Tube Wall Thickness | 2 mm | 1 – 4 |
| Outer Tube Length | 100 mm | 80 – 200 |
| Middle Tube OD | 20.5 mm | 15 – 28 |
| Middle Tube Length | 100 mm | 80 – 200 |
| Inner Tube OD | 16.5 mm | 10 – 25 |
| Inner Tube Length | 100 mm | 80 – 200 |
| Minimum Overlap | 30 mm | 10 – 50 |
| Telescopic Extension | 30 mm | 0 – 70 |
| Top Bar Length | 150 mm | 100 – 300 |
| Top Bar Diameter | 20 mm | 15 – 25 |
| Spring Pin Diameter | 3 mm | 2 – 5 |
| Spring Pin Length | 12 mm | 6 – 20 |
| Lock1 Offset from Outer Top | 20 mm | 5 – 40 |
| Lock2 Offset from Middle Top | 20 mm | 5 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent