Brackets and mounts
bicycle_handle_extender
- Bounding box
- 400.0 × 60.0 × 320.5 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
The bottom bar clamp's another opening must be in the bottom side. Change the shape of the T joints. Chnage them into sometghing like T joint in a plumbing. Shape of 'T' . Keep 2 round tubes for the telescopic extension Measurement description: Total length when it is fully open= 10 inches Total length when it is closed= 6 inches Telescopic tubes: Bottom - 5 inches of length, Size = 7/8 inch OD and ID = 0.799" Second tube = 5 inches, 1 inch of room for the second tube to sit and get locked. Size= 3/4 So when the tube is open, bottom will have 5 inches and the top tube will have 4 inches. the bottom Size of the bottom bar attached on the clmp will be 7/8 and the top bar will 3/4 Genrate the drawing with measuremtnass
Parameters
| Name | Value | Range |
|---|---|---|
| Vertical Clamp Offset | 40 mm | 30 – 60 |
| Clamp Length (X) | 30 mm | 20 – 50 |
| Clamp Width (Y) | 30 mm | 20 – 50 |
| Clamp Height (Z) | 45 mm | 35 – 60 |
| Handlebar Bore Diameter | 22.23 mm | 20 – 30 |
| Bottom Bar Diameter | 22.23 mm | 15 – 30 |
| Bottom Bar Length | 200 mm | 150 – 300 |
| Top Bar Diameter | 19.05 mm | 12 – 25 |
| Top Bar Length | 150 mm | 100 – 250 |
| T-Joint Outer Diameter | 31.75 mm | 20 – 50 |
| T-Joint Run Length | 50 mm | 40 – 80 |
| T-Joint Branch Length | 25 mm | 15 – 40 |
| Outer Tube OD | 22.23 mm | 18 – 30 |
| Tube Wall Thickness | 1 mm | 0.8 – 2 |
| Outer Tube Length | 127 mm | 80 – 200 |
| Inner Tube OD | 19.05 mm | 12 – 25 |
| Inner Tube Length | 127 mm | 80 – 200 |
| Min Overlap | 25.4 mm | 15 – 50 |
| Extension | 80 mm | 0 – 110 |
| Lock Pin Diameter | 6 mm | 4 – 10 |
| Lock Pin Length | 30 mm | 10 – 50 |
| Lock Offset from Top of Outer Tube | 20 mm | 10 – 40 |
| Slot Clearance | 1 mm | 0.2 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent