Beyblade X Deck Case - Push-Push Cam Mechanism

Using this reference video: https://www.youtube.com/watch?v=Cr9_cvoi9DU Design a 3D-printable Beyblade X deck case based on the push-push locking mechanism demonstrated in the video. Preserve the original mechanism's cam track, follower, locking and release motion. Transform its flat blue sliding component into a box-shaped drawer with raised walls and an upright holder for one fully assembled Beyblade X. Create THREE independent drawers arranged side by side in ONE horizontal row, not vertically stacked. All drawers must slide outward from the same long front side. Each drawer has its own push-push mechanism and spring-assisted release. Target outer case size: 232 × 82 × 78 mm (width × height × depth), adjustable if necessary. Use 3 mm PETG drawer walls, PETG structural frame, 2 mm TPU protective shell, 0.4 mm sliding clearances, and physical drawer stops. Allow at least 65 mm diameter clearance for each Beyblade, subject to measurement. Mount the locking cam beside or underneath each drawer without interfering with its storage space. Create separate printable parts for the frame, three drawers, cam followers, holders, and shell. Keep the mechanism accessible for maintenance. Export STL and STEP files. Do not invent or alter the cam geometry if it cannot be determined from the reference.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.