Gears and transmission
Bevel Gear - 60 mm OD, 15 mm Bore
- Bounding box
- 60.8 × 60.3 × 18.9 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- September 19, 2026
Download
Free to download and use. See the terms.
The prompt
I would need a bevel gear for in a differential. Diameter should be 60mm. Is should accomodate a 15mm shaft.
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 3 mm | 1 – 6 |
| Number of Teeth | 18 teeth | 8 – 40 |
| Pressure Angle | 20 deg | 14.5 – 25 |
| Pitch Cone Angle | 45 deg | 25 – 65 |
| Face Width | 12 mm | 5 – 15 |
| Shaft Bore | 15 mm | 6 – 24 |
| Hub Diameter | 22 mm | 16 – 44 |
| Hub Length | 10 mm | 0 – 30 |
| Keyway Width | 5 mm | 0 – 10 |
| Keyway Depth | 2.3 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled