Gears and transmission
Bevel Gear 2mm Bore 18mm OD
- Bounding box
- 18.0 × 18.1 × 8.6 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
I need a bevel gear connection from an engine axle about 2mm in diameter and a second gear about 18mm
Parameters
| Name | Value | Range |
|---|---|---|
| Bore Diameter | 2 mm | 0.8 – 5 |
| Outside Diameter (Heel) | 18 mm | 6 – 40 |
| Number of Teeth | 18 | 6 – 40 |
| Module | 1 mm | 0.3 – 3 |
| Face Width | 5 mm | 1 – 10 |
| Pitch Cone Angle | 45 deg | 15 – 75 |
| Hub Diameter | 6 mm | 3 – 12 |
| Hub Length | 5 mm | 1 – 10 |
| Tooth Gap Fraction | 0.5 | 0.2 – 0.8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled