Loading the interactive model…
Interactive 3D model of Benelli TNT 1130R Motorcycle AssemblyEverything else
Benelli TNT 1130R Motorcycle Assembly
13 views
- Bounding box
- 532.3 × 25.0 × 739.5 mm
- Engine
- Precision B-rep
- Parameters
- 48
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
benelli tnt1130r
Parameters
| Name | Value | Range |
|---|---|---|
| Fork Length | 800 mm | 600 – 1000 |
| Rake Angle | 25 ° | 20 – 30 |
| Fork Outer Diameter | 50 mm | 30 – 70 |
| Front Wheel Diameter | 600 mm | 500 – 700 |
| Front Wheel Width | 120 mm | 80 – 160 |
| Rear Wheel Diameter | 600 mm | 500 – 700 |
| Rear Wheel Width | 180 mm | 140 – 220 |
| Wheelbase | 1400 mm | 1200 – 1600 |
| Swingarm Length | 550 mm | 450 – 650 |
| Swingarm Angle | 0 ° | -5 – 15 |
| Swingarm Width | 250 mm | 200 – 300 |
| Swingarm Thickness | 30 mm | 20 – 50 |
| Frame Tube OD | 25 mm | 15 – 40 |
| Engine Length | 400 mm | 300 – 500 |
| Engine Width | 350 mm | 250 – 450 |
| Engine Height | 500 mm | 400 – 600 |
| Engine Center X | 600 mm | 300 – 900 |
| Engine Center Y | 0 mm | -100 – 100 |
| Engine Center Z | 400 mm | 200 – 600 |
| Tank Length | 380 mm | 250 – 450 |
| Tank Width | 300 mm | 200 – 400 |
| Tank Height | 250 mm | 150 – 350 |
| Tank Center X | 450 mm | 300 – 700 |
| Tank Center Y | 0 mm | -150 – 150 |
| Tank Center Z | 1000 mm | 800 – 1200 |
| Seat Length | 600 mm | 400 – 700 |
| Seat Width | 300 mm | 250 – 400 |
| Seat Height | 80 mm | 40 – 120 |
| Seat Center X | 900 mm | 700 – 1100 |
| Seat Center Y | 0 mm | -100 – 100 |
| Seat Center Z | 850 mm | 650 – 1050 |
| Handlebar Width | 500 mm | 400 – 600 |
| Handlebar Diameter | 22 mm | 15 – 30 |
| Handlebar Offset X | 0 mm | -50 – 50 |
| Handlebar Offset Z | 30 mm | -50 – 100 |
| Header Diameter | 40 mm | 25 – 60 |
| Muffler Diameter | 80 mm | 50 – 100 |
| Muffler Length | 300 mm | 200 – 400 |
| Front Cowl Length | 300 mm | 200 – 400 |
| Front Cowl Width | 400 mm | 300 – 500 |
| Front Cowl Height | 300 mm | 200 – 400 |
| Front Cowl Center X | 150 mm | 0 – 300 |
| Front Cowl Center Z | 750 mm | 500 – 1000 |
| Tail Section Length | 300 mm | 200 – 400 |
| Tail Section Width | 200 mm | 150 – 300 |
| Tail Section Height | 200 mm | 150 – 300 |
| Tail Center X | 1150 mm | 900 – 1300 |
| Tail Center Z | 750 mm | 500 – 1000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS